CLIPPER MACKENZIE SPORT 16'5 - FIBERGLASS (YELLOW)

The MacKenzie 16.5 works great with an outboard in the 2 to 3HP range. It’s a natural with an electric motor up to 48 or 60 thrust. For solo use (without a motor) the MacKenzie 16.5 is available with an optional rowing rig.

Load it up with 1300 lbs of gear and you will have 7” of freeboard. The 16.5 Mac Sport weighs just 68 lbs in Kevlar® allowing you to access spots inaccessible to larger, heavier aluminum car top boats. Motor, row or paddle it.

Note: Recommended motor shaft length is 15”

MacKenzie Sport Series - Speed Test
The table below details the speeds of the MacKenzie Sport models with varied loads and three different motors. The speeds were measured with a handheld GPS unit. All three motors used for this test were 10-20 years old. New motors would likely yield faster speeds.

Standard Features
- Wood Web Seat (Stern)
- Adjustable Sliding Bucket Bow Seat
- Flat Yoke (FG Layup) | Contour Yoke (Kevlar® and Ultralight Layup)
- Flotation Tanks
- Bow & Stern Thwarts
- Adjustable Stern Brace
- Foam Core (Standard in Fiberglass and Kevlar®)

Options On This Model Include
- Construction Fiberglass
- Colour: Yellow
- Gunnel Covers
- Bang Plate

$150 freight fee will be added at time of purchase
This freight fee is the cost of shipping from the manufacturer to our store. The freight fee may fluctuate based on current freight rates.

**Not exactly as pictured, stock photo only**

Dimensions
Length: 16′ 5″
Beam: 37″ | 35″ (@ 4″Waterline)
Bow Height: 23″
Stern Height: 16″
Center Height: 16″
Hull width at the top of the transom: 12"
Weight: Fiberglass 85lbs